Bench SensorLive flood monitor · bench test unit · West Gallery Place, BGC, Manila
—
Simulated
Loading…
All clearReadings are normal. No action needed.
WatchGround is getting wet. Stay alert.
WarningGround is saturated and it is raining. Get ready.
Flooding nowWater at the sensor. Act now.
Rain forecast and flood outlook
Sensor readings combined with the regional forecastFlood outlook · next 6 hours
—
Waiting for the regional rain forecast…
Weather near the sensor
Fetching live weather…
Trends
The most recent readings, oldest on the leftGround wetness (%)
Higher = wetter. A sharp climb means water is soaking in — expect the alert level to rise if it keeps going.
Standing water at the sensor
Flat at 0 = no water. Small bumps are rain or splashes. Above 150 and staying there = flooding.
Reported flood level
0 All clear · 1 Watch · 2 Warning · 3 Flooding now.
Rate of change
How fast the ground is getting wetter (above 0) or drying (below 0). Big spikes = sudden wetting.
Sensor location and projection
Where the sensor is
All clear
Watch / Warning
Flooding
Offline
No node selected
Pick a marker on the map, or a node below.
Select a node to project its soil and water trend forward and cross-check it against the live regional forecast.
Advisory
—
—
Activity
Events
| Time | Node | Event | Detail |
|---|
Packet log
Technical details
Raw sensor numbers and diagnostics, for engineers. You do not need anything below this line to read the status above.
Raw readings
| Node | Link | State | Battery | Soil | Water | Wetness | Risk | Last seen |
|---|
How to read the raw numbers
| Reading | Typical values | What it means |
|---|---|---|
| Soil (0–1023) | about 636 dry · 529 or less wet · 410 or less saturated · 960+ probe unplugged | Lower = wetter. The wetness % above is this number converted to a 0–100 scale. |
| Water (0–1023) | 0 dry · up to about 40 rain or splash · 150+ standing water | Higher = more water on the sensor. 150 is the flood trigger. |
| Rain (0–1023) | about 1008–1023 dry · below 980 raining | Lower = wetter. A wet / dry detector only; it does not measure how much rain. |
| Flood level (0–3) | 0 All clear · 1 Watch · 2 Warning · 3 Flooding now | Decided by the base station from the three readings above. |
Thresholds come from bench tests on 13–14 Nov 2026 with this sensor. They have not been tested in heavy, continuous rain.
Maintenance
No diagnostic run yet.